Aleratec, Inc.

Category: Content
Type: Youtube Video

Generated 2 months ago

New videos detected

  • How To Table Top Mount ChargeCabinet16 - Aleratec Tips & Tricks Part 3

    ChargeCabinet16 (400108) Part 3 Table Top Mounting Mounting Prep: Select a table or desk able to support the weight of cabinet. Use provided template to mark location of bolt holes. We recommend drilling pilot holes using a power drill and a small drill bit (1/16” – 3/32”) for making straight, accurate bolt holes. Drill through pilot holes with a 5/16” drill bit. Mounting Cabinet: Using two peop...

  • How To Set-up Power Configuration ChargeCabinet16 - Aleratec Tips & Tricks Part 2

    ChargeCabinet16 (400108) Part 2 Power Configuration [Connecting Chargers] Open front doors and remove two screws securing power management drawer. Pull out drawer and cut zip ties of power cable. Feed power cable through exit grommet, connect to wall outlet and switch power strip on. After verifying power strip is providing power, unplug power cable from outlet. Connect device chargers to power s...

  • How To Unbox & Prep for Set-Up the ChargeCabinet16 - Aleratec Tips & Tricks Part 1

    ChargeCabinet16 (400108) Part 1 Unboxing & Set-Up Preparation [Unboxing] Unboxing requires two people. Use a location that provides room to maneuver the large box, preferably on a carpeted or blanketed surface. Making sure box is right side up, CAREFULLY use a box cutter to open seal all around the bottom portion of the box. Lift box straight up to free top portion of box. Remove packing materials...

  • How to Sanitize and Overwrite USB HDD Copy Tower SA Duplicator - Aleratec Tips & Tricks Part 7

    http://www.aleratec.com/ [INTRO]: In this video, I will explain the different sanitization options and Overwrite procedure of your Aleratec USB HDD Copy Tower SA duplicator. [USB Drive Sanitization overview] Overwriting is a process of writing a binary set of data across all sectors of your USB hard drives, which is also called “wiping”. The level of security increases as more passes are perfor...

  • How To Install ChargeCabinet16 Cart Conversion Kit- Aleratec Tips & Tricks Part 6

    ChargeCabinet16 (400108) Part 6 Cart Conversion Kit Installation [Installation] Using at least two people, slowly set the base cabinet on its back side, preferably on a carpeted or blanketed surface. Using a Philips #2 drill bit or screwdriver, remove the feet of base cabinet. Screw in casters with provided screws, making sure casters with locks are installed on left side of cabinet. Engage caste...

  • How To Stack Multiple ChargeCabinet16 Units - Aleratec Tips & Tricks Part 5

    ChargeCabinet16 (400108) Part 5 Stacking Multiple ChargeCabinet16 Units [Stacking multiple units] Using at least two people, maneuver base cabinet to desired location. Carefully lift and slowly set an additional cabinet atop of base cabinet, aligning feet within stacking indentations. If stacking cabinets on a table top, please verify table or desk can support the weight of two cabinets before at...

  • How To Mount Bracket to Wall ChargeCabinet16 - Aleratec Tips & Tricks Part 4

    ChargeCabinet16 (400108) Part 4 Mounting Bracket to Wall [Mounting Bracket to Wall] Before you begin, please consult a construction, engineering or architectural professional to select the appropriate hardware and wall mounting option. Use a level and provided template to mark location of screw/bolt holes. Use a Stud Finder to locate and mark stud locations, if necessary. We recommend drilling pi...

Out-Market Your Competitors?

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account Log in

Out-Market Your Competitors

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account

Already a user?  Log in