Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Ultrasonic nondestructive testing (UT testing) can locate internal and external product defects and measure wall thickness discontinuities in tubing, pipe and other materials without causing damage during inspection. Laboratory Testing Inc. provides both immersion and contact ultrasonic inspection services with the ability to inspect products and materials in all shapes and sizes. LTI runs five i...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • The hardenability of steels is measured by a Jominy End Quench Test, also called a Jominy Hardenability Test, Jominy Test or Hardenability Test. Hardenability refers to the specimens ability to be hardened to a particular depth under a particular set of conditions. The Jominy Hardenability Test provides information needed for selecting the proper combination of alloy steel and heat treatment to mi...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Impact testing, including charpy impact testing, can determine material toughness and yield strength. Impact testing at Laboratory Testing Inc. is performed by the charpy testing method. including weld charpy testing and the charpy V-notch test. The charpy impact test is performed with a temperature controlled charpy specimen or charpy V-notch test specimen that is broken by a swinging pendulum ar...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Tensile testing performed on a stainless steel tensile specimen to failure using a computerized tensile test machine. An extensometer measures yield strength at different loads. These measurements are used to compute strain. For more info on Tensile testing and more go to http://www.labtesting.com/services/materials-testing/mechanical-testing/tensile-testing/

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • The hydrostatic test or leak test can locate leaks, verify performance or confirm the strength and durability of the pressure vessels that undergo testing. Laboratory Testing Inc. performs hydrostatic pressure testing on tubing, pipe and coils to pressures up to 10,000 PSI.

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Laboratory Testing Inc. “burst test” beer kegs using our hydrostatic pressure test equipment for the beer keg manufacturer. This is not the typical hydrostatic testing performed at the lab on tubing, pipes and coils, but provided the information the customer needed. Hydro testing was necessary to be sure the kegs could withstand an extreme overpressure and meet the beer industry quality specificat...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Elevated Temperature Tensile Testing or High Temperature Tensile Test is a proven method of evaluating the behavior of materials under a combination of heat and tension. When performing an elevated temperature tensile test, the specimen is placed inside a furnace on our test carousel, which is capable of processing up to three specimens at a time. Our computer-controlled system heats the specimen ...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Magnetic particle inspection is a very sensitive nondestructive test method used to identify defects on the surface of ferromagnetic materials such as forgings, castings, weldments and machined or stamped parts. Magnetic particle inspection or MPI is also called magnetic particle testing (MP) or magnaflux testing. Laboratory Testing Inc. performs both visible dry and wet fluorescent magnetic parti...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Liquid Penetrant Testing is performed at Laboratory Testing Inc. (LTI) by certified NDT technicians. Both fluorescent penetrant inspection and visible dye liquid penetrant testing are performed on products up to 25 ft. in length. Water-washable and post-emulsifiable fluorescent penetrants in sensitivity levels 2, 3 and 4 are available. This video covers the fluorescent penetrant inspection process...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • Fourier Transform Infrared Spectroscopy (FTIR analysis or FTIR Spectroscopy) is an analytical technique used to identify organic, polymeric, and in some cases, inorganic materials. During FTIR analysis, an absorbance spectra of the sample is created which provides information about the unique chemical bonds and molecular structure of the material. For more information on FTIR analysis, go to http...

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video
  • The hydrostatic test or leak test can locate leaks, verify performance or confirm the strength and durability of the pressure vessels that undergo testing. Laboratory Testing Inc. performs hydrostatic pressure testing on tubing, pipe and coils to pressures up to 10,000 PSI.

Laboratory Testing Inc.
Laboratory Testing Inc.
YouTube Video

Out-Market Your Competitors?

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account Log in

By signing up, you agree to the Terms of Service and Privacy Policy.

Out-Market Your Competitors

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account

Already a user?  Log in

By signing up, you agree to the Terms of Service and Privacy Policy.